Without doors, a cabinet is just a box. The cabinet door makes all the difference when establishing a room’s style. At Hardware Resources, we offer over 60 door frame profiles, which give you full control of the cabinet design. We proudly create high quality custom mitered corner doors and drawer fronts using the best equipment and skilled craftspeople in our state-of-the-art facility in Bossier City, Louisiana.
Ordering cabinet doors online is not available at this time on this new HardwareResources.com website. We expect to have door ordering back online in early May or sooner. Our team is working very hard to resolve the situation as quickly as possible.
In the meantime, please utilize the Door Order Form which may be downloaded here. Send the completed form to our customer service team by emailing CustomerService@HardwareResources.com or by faxing it to 318-742-9513.
If you have any questions, please contact our customer service department at 1-800-463-0660.
Select species are purchased to the highest grade and thoroughly inspected to minimize pin knots and mineral streaks. If they appear, this is not considered a defect.
Uniform in color and glued up for a pleasing grain pattern. Flat panel doors will use clear alder plywood.
Select Red Oak
Occasional pin knots and burls allowed on face and in profiled areas. Will be uniform in color and glued up for a pleasing grain pattern and will be lighter in color than a natural grade. Flat panel doors will use red oak plywood.
Uniform in color and glued up for a pleasing grain pattern. Small percentage of mineral, sap, and pitch pockets allowed. Occasional pin knots allowed on face and in profiled areas. Will naturally darken when exposed to sun and natural light. This may be enhanced with light and clear finishes and is not considered a defect. Flat panel doors will use cherry plywood.
Select Hard Maple
Uniform in color and glued up for a pleasing grain pattern and lighter color. "Spray No Wipe" stain process is recommended. Face side will allow small amount of mineral streaks. Small amount of "flags" also allowed. Flat panel doors will use hard maple plywood.
Select Soft Maple
Glued up for a pleasing color and grain pattern. "Spray No Wipe" stain process is recommended. Face side will allow small amounts of mineral streaks. Color variations from white to light gray. Small amount of "flags" also allowed. Flat panel doors will use hard maple plywood.
Rustic means heart or sap may be present depending on species; mineral streaks, random knots, and/or cluster knots may be present.
Rustic “Knotty” Alder
Mineral, sap, and knots are common and allowed. Light tan sap to reddish brown heartwoods are blended throughout. Knot size or color cannot be specified by customer. Knots may contain voids but no light will shine through. Flat panel doors will use knotty alder plywood.
Natural materials have some color variation, small and large stave pieces, and some mineral streaks.
Poplar has naturally occurring characteristics such as mineral streaks, sapwood, heartwood, pin knots, or large color variations and all are acceptable.
MDF can be specified for raised panels or flat panel Paint Grade Doors or Drawer Fronts. The frame material will be poplar.
Our 5-piece doors feature mitered corners for stronger joints and doors which give a more attractive, elegant look to the cabinet doors and drawer fronts.
Overlay or Integrated Appliance Panels
Appliance panels, overlay or integrated, are available to complete the kitchen design. Please refer to the appliance owner's manual to ensure correct dimensions are selected.
Fixed Lazy Susan Doors
We offer custom-made lazy susan doors when needed to complete the design. Customers will receive two identically sized mitered corner doors along with a piece of 3/4" inside corner moulding so that the two doors can be attached at a 90-degree angle.
Slab drawer fronts offer a clean contemporary look in a solid piece of material. We offer 8 different edge profiles to marry with the cabinet door profile seamlessly.
Bar Back/Wainscot made with Mitered Doors
Our bar back/wainscot doors feature a 3/8" inset around the back edge of the door to complete the look as they are placed in the pre-made face frame.
We offer frame doors for all our profiles. The frame door will come without the center panel and will be notched to accept a glass pane or any other type of decorative panel.
Mullion doors are manufactured for use with single pane glass. They are offered in three patterns: 4 lite, 6 lite, and 9 lite. We offer the mullion door option for our most popular frame styles.
2-1/2" APPLIED ROPE MOULDING
3" APPLIED ROPE MOULDING
2-3/4" APPLIED MOULDING*
*Frame heights vary between 1” and 1-1/16” in height
2-1/4" STANDARD PROFILES
All Door Profiles are 3/4" high unless noted
All Drawer Profiles are 3/4" high and 1-1/2" wide unless noted
All Panel Profiles are 5/8" thick unless noted
2-1/2" STANDARD PROFILES
3" STANDARD PROFILES
SLAB DRAWER PROFILES
Standard tab dimension is 3mm. You can specify tab ranging from 0mm to 6mm, in 1mm increments.
Hinge placement is fixed at 3" from each end of door to center of bore.
An upcharge per bore will be added to the order.
Number of hinges per door is fixed according to the following rules:
Doors < or = 39" will have 2 hinges
Doors > 39" to 63" will have 3 hinges
Doors > 63" to 79" will have 4 hinges
Doors > 79" will have 5 hinges
All holes will be drilled with the hinge bore pattern shown.
CENTER STILES & RAILS
Center horizontal rails will be placed on doors over 60" in height. A center horizontal rail will be placed to achieve a 50/50 split unless otherwise specified by customer. Warranty will be void if customer refuses center rail placement on doors over 60" in height. An upcharge will also apply if customer refuses center rail placement on raised panel doors over 60" in height.
If you want spacing other than 50/50, specify on your order which split you need for center rail placement. For example, a 40/60 split means the lower panel is the larger panel and will comprise 60% of the total visual opening space, while the upper panel will comprise 40%.
Center vertical stiles will be placed on doors greater than 25" wide. A center vertical stile will be placed to achieve a 50/50 split. Warranty will be void and an upcharge will apply if center stile is refused on doors greater than 25" wide.
Each additional panel will require a per panel upcharge.
RESOURCES & ASSISTANCE
We've put together this list of commonly viewed resources for your convenience.
Resources for a specific product can be found on the product's detail page.
All About Mitered Corner Doors
Cabinet Doors and Drawer Fronts Brochure
Cabinet Doors Overview
Cabinet Doors and Drawer Fronts Warranty Information